Industriedach mit B-ThermIQ Beschichtung

Commercial & Industrial

Preserve performance.
Save energy.

Higher efficiency. Lower costs. Measurable from day one.

Beispielrechnung

Logistikhalle 5.000 m² in Wien.
Was sie spart.

Typische Industriehalle mit Bitumen-Flachdach, durchgehender Klimatisierung, Sanierung in 5 Jahren fällig. Legen Sie den Schalter unter der Halle um — und sehen Sie, was sich ändert.

Dachoberfläche:70 °C
Außentemperatur:28 °C
Sommer-Spitzenwerte
Ohne BeschichtungMit B-ThermIQ

Jährliche Ersparnis Jahr 1

€ 79.666

Amortisation

4.4 Jahre

bis die Investition bezahlt ist

Ersparnis 10 Jahre

€ 899.991

kumuliert, vor Investition

Netto nach 10 J

€ 549.991

Ersparnis minus Investition

HVAC-Strom

€ 40.083

/Jahr

Bitumen vermieden

€ 475.000

einmalig

Investition

€ 350.000

ab 70 €/m² · individuell

CO₂-Reduktion

358 t

über 10 Jahre

Eigene Werte einsetzen

Annahmen: 5.000 m² Bitumen-Flachdach, durchgehend klimatisiert mit 400.000 kWh HVAC/Jahr, Außentemperatur 28 °C, Strompreis 0,28 €/kWh, Energieinflation 5 %/J, Sanierung in 5 Jahren à 95 €/m². Beschichtung ab 70 €/m² — Preis individuell pro Projekt. Sicherheitsfaktor 0,4 auf die theoretische HVAC-Reduktion. Dachoberflächen-Temperaturen sind typische Wiener Sommer-Spitzenwerte; unsere reale Messung lag bei 47,5 °C ohne und 11,3 °C mit Beschichtung (ASTM C1549). Vollständige Methodik & Quellen im Rechner.

93 %

Sonnenstrahlung reflektiert

180 °C

Einsatztemperatur Industry

0

laufende Energiekosten

Three application areas. One product.

B-ThermIQ for roofs and facades, for pipes and equipment, and as a PV yield optimiser.

Passive Building Cooling

Passive Building Cooling

Metal roofs and facades heat up extremely in summer. Interior temperatures rise, air conditioning runs at full capacity, temperature-sensitive goods suffer.

B-ThermIQ reflects 93% of solar radiation and lowers surface temperature by up to 20–40 °C. Interior temperature drops noticeably — no electricity, no renovation needed.

  • Bis zu 10 °C niedrigere Hallentemperatur
  • Keine laufenden Energiekosten
  • Schutz temperaturempfindlicher Güter
  • Weniger Belastung für Klimaanlagen
Roof Protection — Bitumen & Membranes

Roof Protection — Bitumen & Membranes

Bitumen roofs heat up to over 70 °C in summer and expand. When it rains, the surface cools abruptly and contracts. This constant expansion and contraction causes cracks, leaks, and costly repairs.

B-ThermIQ ROOF keeps the roof surface cool and drastically reduces thermal stress. Fewer temperature cycles means less material stress, no cracks, longer lifespan. The roof membrane stays intact — for years.

  • Deutlich weniger thermische Ausdehnung und Kontraktion
  • Keine Risse durch Temperaturschocks (Hitze → Regen)
  • Verlängerte Lebensdauer der Dachabdichtung
  • Vermeidung teurer Dachreparaturen und -erneuerungen
Pipes & Equipment up to 180 °C

Pipes & Equipment up to 180 °C

Process heat is lost through uninsulated or poorly insulated pipework. High surface temperatures pose a safety risk. Corrosion under insulation (CUI) causes expensive damage.

B-ThermIQ INDUSTRY is applied directly to pipes, tanks, and equipment — up to 180 °C. Reduces heat loss, lowers surface temperature, and prevents corrosion under the coating.

  • Reduzierter Gas-/Ölverbrauch durch weniger Prozesswärmeverlust
  • Verbesserte Arbeitssicherheit durch kühlere Oberflächen
  • Kein CUI (Corrosion Under Insulation)
  • Sprühbare Applikation auch bei komplexen Geometrien
PV Yield Optimisation

PV Yield Optimisation

Dark roofs heat up PV modules — every degree costs output. Bifacial modules cannot reach their full potential on dark surfaces.

B-ThermIQ-coated roofs lower module temperature and reflect light onto the rear side of bifacial modules. Double benefit: cooling load reduction and PV boost in one step.

  • Bis zu 15–20 % mehr Ertrag bei bifazialen Modulen
  • Verbesserte Sommerleistung aller Modultypen
  • Kein zusätzliches Gewicht, keine Statik-Probleme
  • Ideal in Kombination mit dem EPBD-Solargebot

Industries that benefit immediately

Kühllogistik & Kühllhäuser

Schnellster ROI — jede kWh weniger Kühllast spart direkt Geld.

Supermärkte & LEH

Flachdächer, hoher Kühlbedarf, skalierbar über Hunderte Filialen.

Logistik- & Lagerhallen

Riesige Dachflächen mit maximaler Sonneneinstrahlung.

Produktionshallen

Mitarbeiterkomfort, Prozesstemperatur-Kontrolle, Energiekosten.

Gewerbebauten

Bürogebäude, Handel, Gastronomie — kühlere Räume im Sommer.

Öffentliche Gebäude

Schulen, Sporthallen, Verwaltung — passive Kühlung ohne Betriebskosten.

Product Properties

☀️

93 % Reflexion

💨

Diffusionsoffen

🛡️

Schutzbarriere

🌱

Klimafreundlich

📈

Schneller ROI

🌍

Messbare CO₂-Reduktion

See for yourself.

We offer on-site tests and individual potential calculations for your building. Free and without obligation.

EnquiryCommercial & Industrial | ThermIQ